Array Rotation Techniques in DSA Rust - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is array rotation?

Array rotation means moving the elements of an array so that they shift positions. For example, in a left rotation by 1, the first element moves to the end, and all others move one step left.

beginner

Explain left rotation by d positions on an array.

Left rotation by d means each element moves d steps to the left. The elements that go past the first position wrap around to the end of the array.

intermediate

What is the reversal algorithm for array rotation?

The reversal algorithm rotates an array by reversing parts of it. For left rotation by d: reverse first d elements, reverse the rest, then reverse the whole array. This moves elements efficiently without extra space.

advanced

How does the juggling algorithm work for array rotation?

The juggling algorithm divides the array into sets based on the greatest common divisor (GCD) of array size and rotation count. It moves elements within each set to rotate the array in place.

intermediate

What is the time complexity of the reversal algorithm for array rotation?

The reversal algorithm runs in O(n) time, where n is the size of the array. It performs three reversals, each taking linear time, making it efficient and in-place.

What happens to the first element in a left rotation by 1?

A It moves to the end of the array

B It stays in the first position

C It moves to the middle of the array

D It is removed from the array

In left rotation by 1, the first element shifts to the last position.

Which algorithm uses the greatest common divisor (GCD) to rotate an array?

A Juggling algorithm

B Reversal algorithm

C Bubble sort

D Insertion sort

The juggling algorithm divides the array into sets based on GCD to rotate elements.

How many times does the reversal algorithm reverse parts of the array for rotation?

A Twice

B Three times

C Once

D Four times

It reverses first part, second part, then the whole array, totaling three reversals.

What is the space complexity of the reversal algorithm for array rotation?

A O(n)

B O(d)

C O(log n)

D O(1)

The reversal algorithm rotates the array in place using constant extra space.

If an array has 7 elements and you rotate it left by 7, what is the result?

A Array is sorted

B Array is reversed

C Array remains the same

D Array is empty

Rotating by the array size results in the same array.

Describe how to perform a left rotation on an array using the reversal algorithm.

Think about reversing parts to move elements to correct positions.

Explain the juggling algorithm for array rotation and how it uses the greatest common divisor (GCD).

Focus on how sets are formed and elements are moved.

Practice

1. What does rotating an array to the left by 2 positions mean for the array [1, 2, 3, 4, 5]?

easy

A. The last two elements move to the front, resulting in [4, 5, 1, 2, 3]

B. The first two elements move to the end, resulting in [3, 4, 5, 1, 2]

C. The array is reversed, resulting in [5, 4, 3, 2, 1]

D. The array remains unchanged

Solution

1. Step 1: Understand left rotation by 2

   Left rotation by 2 means removing the first two elements and placing them at the end.

2. Step 2: Apply rotation on given array

   Starting with [1, 2, 3, 4, 5], removing first two elements [1, 2] and appending them at the end gives [3, 4, 5, 1, 2].

3. Final Answer:

   [3, 4, 5, 1, 2] -> Option B

4. Quick Check:

   Left rotate by 2 = first 2 elements moved to end [OK]

Hint: Left rotate by k moves first k elements to the end [OK]

Common Mistakes:

• Confusing left rotation with right rotation
• Not moving elements but just swapping
• Thinking rotation reverses the array

2. Which of the following Rust code snippets correctly rotates an array arr of length 5 to the right by 1 position?

easy

A. let rotated = [&arr[0..4], &arr[4..5]].concat();

B. let rotated = [&arr[1..5], &arr[0..1]].concat();

C. let rotated = [&arr[4..5], &arr[0..4]].concat();

D. let rotated = [&arr[3..5], &arr[0..3]].concat();

Solution

1. Step 1: Understand right rotation by 1

   Right rotation by 1 means last element moves to front, rest shift right.

2. Step 2: Check code slices for correct order

   let rotated = [&arr[4..5], &arr[0..4]].concat(); takes last element arr[4..5] and then first 4 elements arr[0..4], concatenating them correctly.

3. Final Answer:

   let rotated = [&arr[4..5], &arr[0..4]].concat(); -> Option C

4. Quick Check:

   Right rotate by 1 = last element + rest [OK]

Hint: Right rotate by 1 = last element + rest [OK]

Common Mistakes:

• Using wrong slice indices
• Concatenating slices in wrong order
• Confusing left and right rotation slices

3. What is the output of the following Rust code?

let arr = vec![10, 20, 30, 40, 50];
let k = 2;
let n = arr.len();
let rotated: Vec<_> = arr.iter().cycle().skip(n - k).take(n).cloned().collect();
println!("{:?}", rotated);

medium

A. [20, 30, 40, 50, 10]

B. [30, 40, 50, 10, 20]

C. [50, 10, 20, 30, 40]

D. [40, 50, 10, 20, 30]

Solution

1. Step 1: Understand rotation logic in code

   Code cycles array, skips n-k=3 elements, then takes n=5 elements, effectively right rotating by 2.

2. Step 2: Trace elements after skipping 3

   Skipping first 3 elements: 10,20,30 skipped; next elements are 40,50, then cycle back 10,20,30.

3. Step 3: Collect 5 elements

   Elements collected: 40, 50, 10, 20, 30.

4. Final Answer:

   [40, 50, 10, 20, 30] -> Option D

5. Quick Check:

   Right rotate by 2 = last 2 elements front [OK]

Hint: Cycle and skip n-k for right rotation [OK]

Common Mistakes:

• Confusing skip count with k
• Mixing left and right rotation logic
• Not using cycle iterator correctly

4. The following Rust function is intended to left rotate an array by k positions. What is the bug?

fn left_rotate(arr: &mut [i32], k: usize) {
    let n = arr.len();
    for i in 0..k {
        let temp = arr[i];
        arr[i] = arr[n - k + i];
        arr[n - k + i] = temp;
    }
}

medium

A. It swaps wrong elements; rotation logic is incorrect

B. It causes index out of bounds error

C. It reverses the array instead of rotating

D. It does nothing because loop range is zero

Solution

1. Step 1: Analyze the swapping logic

   The code swaps arr[i] with arr[n-k+i], which does not achieve left rotation but swaps wrong pairs.

2. Step 2: Understand correct rotation method

   Left rotation requires shifting elements left and moving first k elements to end, not swapping like this.

3. Final Answer:

   It swaps wrong elements; rotation logic is incorrect -> Option A

4. Quick Check:

   Incorrect swap logic = wrong rotation [OK]

Hint: Rotation needs shift + append, not simple swaps [OK]

Common Mistakes:

• Swapping instead of shifting elements
• Using wrong indices for swapping
• Assuming swap equals rotation

5. Given an array arr = [1, 2, 3, 4, 5, 6], how can you rotate it left by 4 positions using Rust slice operations without extra space?

hard

A. Reverse first 4 elements, reverse last 2 elements, reverse entire array

B. Reverse last 4 elements, reverse first 2 elements, reverse entire array

C. Reverse entire array, reverse last 2 elements, reverse first 4 elements

D. Reverse first 2 elements, reverse last 4 elements, reverse entire array

Solution

1. Step 1: Understand rotation by reversal method

   Left rotate by k means reverse first k elements, reverse remaining, then reverse whole array.

2. Step 2: Apply to k=4, n=6

   Reverse first 4 elements [1,2,3,4], reverse last 2 elements [5,6], then reverse entire array.

3. Final Answer:

   Reverse first 4 elements, reverse last 2 elements, reverse entire array -> Option A

4. Quick Check:

   Rotation by reversal = reverse k, reverse n-k, reverse all [OK]

Hint: Rotate left k = reverse first k, reverse rest, reverse all [OK]

Common Mistakes:

• Reversing in wrong order
• Mixing k and n-k segments
• Using extra space instead of in-place reversal