Topological Sort Using Kahn's Algorithm BFS in DSA Python - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the main idea behind Kahn's Algorithm for topological sorting?

Kahn's Algorithm repeatedly removes nodes with zero incoming edges (in-degree zero) and adds them to the sorted list, updating in-degrees of connected nodes until all nodes are processed or a cycle is detected.

beginner

In Kahn's Algorithm, what does a node with in-degree zero represent?

A node with in-degree zero has no dependencies and can be safely placed next in the topological order.

intermediate

Why does Kahn's Algorithm use a queue data structure?

The queue stores nodes with in-degree zero to process them in order, ensuring nodes are added to the topological order only after all their dependencies are resolved.

intermediate

What does it mean if after running Kahn's Algorithm, not all nodes are included in the topological order?

It means the graph contains a cycle, so a valid topological order does not exist.

intermediate

How does Kahn's Algorithm update the in-degree of nodes during execution?

When a node is removed from the queue, the algorithm decreases the in-degree of all its neighbors by one, reflecting that one dependency has been resolved.

What data structure is primarily used in Kahn's Algorithm to store nodes with zero in-degree?

A Queue

B Stack

C Set

D Priority Queue

Kahn's Algorithm uses a queue to process nodes with zero in-degree in a first-in-first-out manner.

What does the presence of a cycle in the graph imply for topological sorting using Kahn's Algorithm?

A Sort will be reversed

B Topological sort is not possible

C Sort will include duplicates

D Sort will be partial

If a cycle exists, Kahn's Algorithm cannot process all nodes, so a valid topological order does not exist.

What is the initial step in Kahn's Algorithm?

A Sort nodes alphabetically

B Add all nodes to the queue

C Remove all edges

D Calculate in-degree of all nodes

The algorithm starts by calculating the in-degree of each node to identify nodes with zero in-degree.

When a node is removed from the queue in Kahn's Algorithm, what happens next?

A Decrease in-degree of its neighbors by one

B Increase in-degree of its neighbors by one

C Add all neighbors to the queue immediately

D Remove neighbors from the graph

Removing a node means one dependency is resolved, so neighbors' in-degree is decreased by one.

Which of the following best describes the order produced by Kahn's Algorithm?

A A reversed order of input nodes

B A random ordering of nodes

C A linear ordering of nodes respecting dependencies

D An ordering based on node values

Kahn's Algorithm produces a linear order where each node appears after all its dependencies.

Explain step-by-step how Kahn's Algorithm performs topological sorting on a directed graph.

Think about how dependencies are resolved one by one.

Describe how Kahn's Algorithm detects cycles in a graph during topological sorting.

Consider what happens if some nodes never get in-degree zero.

Practice

1. What is the main purpose of Kahn's Algorithm in graph theory?

easy

A. To find a topological ordering of a Directed Acyclic Graph (DAG)

B. To detect cycles in an undirected graph

C. To find the shortest path between two nodes

D. To calculate the minimum spanning tree

Solution

1. Step 1: Understand Kahn's Algorithm goal

   Kahn's Algorithm is designed to produce a linear ordering of vertices in a Directed Acyclic Graph (DAG) such that for every directed edge u -> v, u comes before v in the ordering.

2. Step 2: Compare with other graph algorithms

   Other options describe different algorithms: cycle detection, shortest path, and minimum spanning tree are unrelated to Kahn's Algorithm.

3. Final Answer:

   To find a topological ordering of a Directed Acyclic Graph (DAG) -> Option A

4. Quick Check:

   Topological sort = Kahn's Algorithm purpose [OK]

Hint: Kahn's Algorithm always finds order in DAGs [OK]

Common Mistakes:

• Confusing topological sort with cycle detection
• Thinking it works on undirected graphs
• Mixing it up with shortest path algorithms

2. Which of the following Python code snippets correctly initializes the in-degree array for Kahn's Algorithm given a graph adjacency list graph with n nodes?

easy

A. in_degree = [0] * n
for u in range(n):
for v in graph[u]:
in_degree[v] += 1

B. in_degree = [0] * n
for v in range(n):
for u in graph[v]:
in_degree[v] += 1

C. in_degree = [1] * n
for u in range(n):
for v in graph[u]:
in_degree[v] += 1

D. in_degree = [0] * n
for u in graph:
for v in graph[u]:
in_degree[u] += 1

Solution

1. Step 1: Understand in-degree calculation

   In-degree of a node is the count of edges coming into it. For each edge u -> v, increment in_degree[v].

2. Step 2: Analyze code snippets

   in_degree = [0] * n for u in range(n): for v in graph[u]: in_degree[v] += 1 correctly loops over each node u and its neighbors v, incrementing in_degree[v]. in_degree = [0] * n for v in range(n): for u in graph[v]: in_degree[v] += 1 increments the source node incorrectly. in_degree = [1] * n for u in range(n): for v in graph[u]: in_degree[v] += 1 initializes in_degree with 1s, which is wrong. in_degree = [0] * n for u in graph: for v in graph[u]: in_degree[u] += 1 increments in_degree[u], which is incorrect.

3. Final Answer:

   in_degree = [0] * n for u in range(n): for v in graph[u]: in_degree[v] += 1 -> Option A

4. Quick Check:

   Increment in_degree of destination node [OK]

Hint: Increment in-degree of target nodes, not source [OK]

Common Mistakes:

• Incrementing in-degree of source node instead of target
• Initializing in-degree with wrong default values
• Swapping loop variables u and v

3. What is the output of the following Python code implementing Kahn's Algorithm on the graph with edges: 0->1, 0->2, 1->3, 2->3?

from collections import deque

graph = {0: [1, 2], 1: [3], 2: [3], 3: []}
n = 4
in_degree = [0]*n
for u in range(n):
    for v in graph[u]:
        in_degree[v] += 1
queue = deque([i for i in range(n) if in_degree[i] == 0])
topo_order = []
while queue:
    node = queue.popleft()
    topo_order.append(node)
    for neighbor in graph[node]:
        in_degree[neighbor] -= 1
        if in_degree[neighbor] == 0:
            queue.append(neighbor)
print(topo_order)

medium

A. [0, 1, 2, 3]

B. [3, 1, 2, 0]

C. [0, 2, 1, 3]

D. [1, 2, 0, 3]

Solution

1. Step 1: Calculate in-degree and initialize queue

   In-degree: 0=0, 1=1, 2=1, 3=2. Queue starts with nodes having in-degree 0: [0].

2. Step 2: Process nodes in queue

   Pop 0, append to topo_order: [0]. Decrement in-degree of 1 and 2 to 0, add both to queue: [1, 2]. Pop 1, append: [0,1]. Decrement in-degree of 3 to 1. Pop 2, append: [0,1,2]. Decrement in-degree of 3 to 0, add 3 to queue: [3]. Pop 3, append: [0,1,2,3].

3. Final Answer:

   [0, 2, 1, 3] -> Option C

4. Quick Check:

   Topological order = [0, 2, 1, 3] [OK]

Hint: Start with zero in-degree nodes, process neighbors reducing in-degree [OK]

Common Mistakes:

• Ignoring order of nodes with zero in-degree
• Not updating in-degree after popping nodes
• Appending nodes before in-degree reaches zero

4. Identify the error in the following Kahn's Algorithm code snippet and choose the correct fix:

from collections import deque

graph = {0: [1], 1: [2], 2: [0]}
n = 3
in_degree = [0]*n
for u in range(n):
    for v in graph[u]:
        in_degree[u] += 1
queue = deque([i for i in range(n) if in_degree[i] == 0])
topo_order = []
while queue:
    node = queue.popleft()
    topo_order.append(node)
    for neighbor in graph[node]:
        in_degree[neighbor] -= 1
        if in_degree[neighbor] == 0:
            queue.append(neighbor)
print(topo_order)

medium

A. Initialize in_degree with ones instead of zeros

B. Change 'in_degree[u] += 1' to 'in_degree[v] += 1' to correctly count incoming edges

C. Replace deque with list for queue implementation

D. Remove the while loop to avoid infinite processing

Solution

1. Step 1: Identify incorrect in-degree update

   The code increments in_degree[u] for edges u->v, but it should increment in_degree[v] because in-degree counts incoming edges to v.

2. Step 2: Understand impact on queue initialization

   Incorrect in-degree causes wrong zero in-degree nodes, so queue may be empty or incorrect, breaking the algorithm.

3. Final Answer:

   Change 'in_degree[u] += 1' to 'in_degree[v] += 1' to correctly count incoming edges -> Option B

4. Quick Check:

   Increment in-degree of target node, not source [OK]

Hint: In-degree counts edges coming into a node, increment target node [OK]

Common Mistakes:

• Incrementing in-degree of source node
• Not detecting cycles due to wrong in-degree
• Using wrong data structure for queue

5. Given a Directed Acyclic Graph (DAG) with nodes 0 to 5 and edges: 5->2, 5->0, 4->0, 4->1, 2->3, 3->1, which of the following is a valid topological order produced by Kahn's Algorithm?

hard

A. [4, 5, 2, 3, 1, 0]

B. [5, 4, 2, 3, 1, 0]

C. [0, 1, 2, 3, 4, 5]

D. [4, 5, 0, 2, 3, 1]

Solution

1. Step 1: Calculate in-degree for each node

   In-degree: 0=2 (from 5,4), 1=2 (from 4,3), 2=1 (from 5), 3=1 (from 2), 4=0, 5=0. Start queue with nodes 4 and 5.

2. Step 2: Process nodes in queue and build order

   Pop 4: order=[4], decrement in-degree of 0 to 1 and 1 to 1. Pop 5: order=[4,5], assuming graph[5]=[0,2], decrement 0 to 0 and append 0, decrement 2 to 0 and append 2: queue=[0,2]. Pop 0: order=[4,5,0]. Pop 2: order=[4,5,0,2], decrement 3 to 0, append 3. Pop 3: order=[4,5,0,2,3], decrement 1 to 0, append 1. Pop 1: order=[4,5,0,2,3,1].

3. Final Answer:

   [4, 5, 0, 2, 3, 1] -> Option D

4. Quick Check:

   Valid topological order respects edges [OK]

Hint: Start with zero in-degree nodes, remove edges, add new zero in-degree nodes [OK]

Common Mistakes:

• Ignoring in-degree counts leading to invalid order
• Placing nodes before their dependencies
• Assuming any order is valid without checking edges