Shortest Path in DAG Using Topological Order in DSA Python - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is a Directed Acyclic Graph (DAG)?

A DAG is a graph with directed edges and no cycles, meaning you cannot start at one node and follow a path that loops back to the same node.

intermediate

Why do we use topological order for shortest path in a DAG?

Topological order arranges nodes so all edges go from earlier to later nodes, allowing us to relax edges in one pass without revisiting nodes, making shortest path calculation efficient.

beginner

What does 'relaxing an edge' mean in shortest path algorithms?

Relaxing an edge means checking if the current known shortest distance to a node can be improved by going through another node connected by that edge, and updating it if yes.

intermediate

What is the time complexity of finding shortest paths in a DAG using topological order?

The time complexity is O(V + E), where V is the number of vertices and E is the number of edges, because each node and edge is processed once.

beginner

What happens if the graph has cycles when using topological order for shortest path?

Topological order does not exist for graphs with cycles, so this method cannot be used. The algorithm requires a DAG to work correctly.

What is the first step in finding the shortest path in a DAG using topological order?

A Find the topological order of the graph

B Initialize all distances to infinity

C Relax all edges randomly

D Check for cycles in the graph

We first find the topological order to process nodes in a sequence that respects edge directions.

When relaxing edges in shortest path for DAG, what do we update?

A The topological order of nodes

B The number of edges in the graph

C The distance to the destination node if a shorter path is found

D The adjacency list

Relaxing updates the shortest known distance to a node if a better path is found.

Why can't we use Dijkstra's algorithm directly on a DAG for shortest path?

A Because DAGs have cycles

B Because DAG edges have negative weights

C Because Dijkstra's algorithm only works on undirected graphs

D Because topological order is faster and simpler for DAGs

Topological order allows a simpler and faster method for shortest path in DAGs compared to Dijkstra.

What is the initial distance assigned to the source node in shortest path calculation?

A Zero

B Negative infinity

C Infinity

D One

The source node distance is set to zero because the distance from source to itself is zero.

If a node is unreachable from the source in a DAG, what is its shortest path distance after the algorithm?

A Zero

B Infinity

C Negative one

D One

Unreachable nodes keep their distance as infinity, meaning no path exists from the source.

Explain how topological order helps in finding the shortest path in a DAG.

Think about how ordering nodes avoids revisiting and simplifies edge relaxation.

Describe the steps to find shortest paths from a source node in a DAG using topological order.

Start from ordering nodes, then update distances step-by-step.

Practice

1. What is the main advantage of using topological order to find the shortest path in a Directed Acyclic Graph (DAG)?

easy

A. It allows processing vertices in a linear order without revisiting nodes.

B. It guarantees the graph has cycles.

C. It sorts the graph by edge weights.

D. It finds the longest path instead of the shortest.

Solution

1. Step 1: Understand topological order in DAG

   Topological order arranges nodes so all edges go from earlier to later nodes, ensuring no cycles.

2. Step 2: Use topological order for shortest path

   Processing nodes in this order means each node is visited once, and distances can be updated efficiently without revisiting.

3. Final Answer:

   It allows processing vertices in a linear order without revisiting nodes. -> Option A

4. Quick Check:

   Topological order = linear processing [OK]

Hint: Topological order processes nodes once in DAG [OK]

Common Mistakes:

• Thinking topological order applies to graphs with cycles
• Confusing shortest path with longest path
• Assuming topological order sorts by edge weights

2. Which of the following Python code snippets correctly initializes the distance array for shortest path calculation in a DAG with 5 nodes, starting from node 0?

easy

A. dist = [float('inf')] * 5; dist[5] = 0

B. dist = [0] * 5; dist[0] = float('inf')

C. dist = [None] * 5; dist[0] = 0

D. dist = [float('inf')] * 5; dist[0] = 0

Solution

1. Step 1: Initialize distances with infinity

   We set all distances to infinity to represent unknown paths initially.

2. Step 2: Set start node distance to zero

   The distance to the start node (0) is zero because it is the source.

3. Final Answer:

   dist = [float('inf')] * 5; dist[0] = 0 -> Option D

4. Quick Check:

   Start node distance = 0, others = infinity [OK]

Hint: Start distance zero, others infinity for shortest path [OK]

Common Mistakes:

• Setting start node distance to infinity
• Using invalid index dist[5] (out of range)
• Initializing distances with zeros

3. Given the DAG edges with weights: 0->1 (2), 0->2 (4), 1->2 (1), 1->3 (7), 2->3 (3), and start node 0, what is the shortest distance to node 3 after running shortest path using topological order?

medium

A. 6

B. 7

C. 9

D. 10

Solution

1. Step 1: Calculate distances step-by-step

   Start dist: [0, inf, inf, inf]. From 0: dist[1]=2, dist[2]=4. From 1: dist[2]=min(4,2+1=3)=3, dist[3]=2+7=9. From 2: dist[3]=min(9,3+3=6)=6.

2. Step 2: Final shortest distance to node 3

   The shortest distance to node 3 is 6 after updates.

3. Final Answer:

   6 -> Option A

4. Quick Check:

   Shortest path to 3 = 6 [OK]

Hint: Update distances using topological order edges [OK]

Common Mistakes:

• Not updating dist[2] to 3 via node 1
• Taking longer path 0->1->3 as shortest
• Ignoring edge weights when updating distances

4. Consider this code snippet for shortest path in DAG:

dist = [float('inf')] * 4
dist[0] = 0
topo_order = [0, 1, 2, 3]
graph = {0: [(1, 1), (2, 4)], 1: [(2, 2), (3, 6)], 2: [(3, 3)], 3: []}
for u in topo_order:
    for v, w in graph[u]:
        if dist[u] + w < dist[v]:
            dist[v] = dist[u] + w
print(dist)

What is the output?

medium

A. [0, 1, 2, 5]

B. [0, 1, 4, 7]

C. [0, 1, 3, 6]

D. [0, 1, 3, 9]

Solution

1. Step 1: Initialize distances and process node 0

   dist = [0, inf, inf, inf]. From 0: dist[1]=1, dist[2]=4.

2. Step 2: Process node 1 and update distances

   From 1: dist[2]=min(4,1+2=3)=3, dist[3]=1+6=7.

3. Step 3: Process node 2 and update distance

   From 2: dist[3]=min(7,3+3=6)=6.

4. Step 4: Final distances array

   dist = [0, 1, 3, 6]

5. Final Answer:

   [0, 1, 3, 6] -> Option C

6. Quick Check:

   Distances updated correctly using topological order [OK]

Hint: Update dist[v] only if new path is shorter [OK]

Common Mistakes:

• Not updating dist[2] to 3 via node 1
• Using wrong edge weights
• Printing dist before updates complete

5. You have a DAG with nodes 0 to 4 and edges: 0->1 (3), 0->2 (6), 1->2 (4), 1->3 (4), 2->3 (8), 3->4 (2). Using topological order [0,1,2,3,4], what is the shortest path distance from node 0 to node 4?

hard

A. 15

B. 9

C. 13

D. 11

Solution

1. Step 1: Initialize distances and update from node 0

   dist = [0, inf, inf, inf, inf]. From 0: dist[1]=3, dist[2]=6.

2. Step 2: Update distances from node 1 and 2

   From 1: dist[2]=min(6,3+4=7)=6 (unchanged), dist[3]=3+4=7. From 2: dist[3]=min(7,6+8=14)=7 (unchanged).

3. Step 3: Update distance from node 3 to 4

   dist[4]=7+2=9.

4. Step 4: Final shortest distance to node 4

   The shortest distance to node 4 is 9.

5. Final Answer:

   9 -> Option B

6. Quick Check:

   Shortest path 0->1->3->4 = 9 [OK]

Hint: Check all edges in topological order for shortest updates [OK]

Common Mistakes:

• Choosing longer path 0->2->3->4
• Adding weights incorrectly
• Ignoring topological order updates