Edit Distance Problem Levenshtein in DSA Python - Interactive Practice

Practice - 5 Tasks

1fill in blank

easy

Complete the code to initialize the DP table with zeros.

DSA Python

dp = [[[1] for _ in range(len(word2) + 1)] for _ in range(len(word1) + 1)]

Drag options to blanks, or click blank then click option'

A''

B1

C0

DNone

Attempts:

3 left

💡 Hint

Common Mistakes

Using 1 instead of 0 causes wrong initial distances.

Using None or empty string causes type errors.

The DP table should be initialized with zeros to start counting edit distances.

2fill in blank

medium

Complete the code to fill the first row of the DP table with increasing numbers.

DSA Python

for j in range(1, len(word2) + 1):
    dp[0][j] = dp[0][j-1] [1] 1

Drag options to blanks, or click blank then click option'

A+

B-

C*

D//

Attempts:

3 left

💡 Hint

Common Mistakes

Using subtraction or multiplication changes the meaning.

Using integer division causes zero increments.

Each cell in the first row increases by 1 to represent insertions.

3fill in blank

hard

Fix the error in the condition to check if characters are the same.

DSA Python

if word1[i-1] [1] word2[j-1]:

Drag options to blanks, or click blank then click option'

A!=

B<

C>

D==

Attempts:

3 left

💡 Hint

Common Mistakes

Using '!=' causes wrong cost calculation.

Using '>' or '<' is not meaningful for characters here.

We check if characters are equal to decide if substitution cost is zero.

4fill in blank

hard

Fill both blanks to compute the minimum edit distance for dp[i][j].

DSA Python

dp[i][j] = min(dp[i-1][j] + [1], dp[i][j-1] + [2], dp[i-1][j-1] + cost)

Drag options to blanks, or click blank then click option'

A1

B0

Ccost

D2

Attempts:

3 left

💡 Hint

Common Mistakes

Using 0 or cost for insertion/deletion is incorrect.

Using 2 overestimates the cost.

Insertion and deletion cost 1 each, so add 1 to those moves.

5fill in blank

hard

Fill all three blanks to set the substitution cost correctly.

DSA Python

cost = [1] if word1[i-1] [2] word2[j-1] else [3]

Drag options to blanks, or click blank then click option'

A0

B==

C1

D!=

Attempts:

3 left

💡 Hint

Common Mistakes

Using '!=' in condition reverses logic.

Using cost 2 or 0 incorrectly.

If characters are equal, cost is 0; else cost is 1 for substitution.

Practice

1. What does the Edit Distance (Levenshtein distance) between two strings measure?

easy

A. The minimum number of single-character edits to change one string into the other

B. The number of common characters between two strings

C. The length of the longest common substring

D. The number of characters in the longer string

Solution

1. Step 1: Understand the definition of Edit Distance

   Edit Distance counts how many changes (insert, delete, replace) are needed to convert one string to another.

2. Step 2: Compare options with definition

   Only The minimum number of single-character edits to change one string into the other correctly describes this minimum number of single-character edits.

3. Final Answer:

   The minimum number of single-character edits to change one string into the other -> Option A

4. Quick Check:

   Edit Distance = minimum edits [OK]

Hint: Edit Distance counts minimal edits to match strings [OK]

Common Mistakes:

• Confusing with longest common substring
• Thinking it counts common characters
• Assuming it measures string length

2. Which of the following Python code snippets correctly initializes a 2D list for dynamic programming of size (m+1) x (n+1)?

easy

A. dp = [0] * (m+1) * (n+1)

B. dp = [[0] * (n+1) for _ in range(m+1)]

C. dp = [[0] * m for _ in range(n)]

D. dp = [[0] * (m+1)] * (n+1)

Solution

1. Step 1: Understand 2D list initialization in Python

   Using list comprehension with separate inner lists avoids shared references.

2. Step 2: Analyze each option

   dp = [[0] * (n+1) for _ in range(m+1)] correctly creates independent rows. dp = [[0] * (m+1)] * (n+1) creates shallow copies causing bugs. Options A and C have wrong dimensions or types.

3. Final Answer:

   dp = [[0] * (n+1) for _ in range(m+1)] -> Option B

4. Quick Check:

   Proper 2D list init = dp = [[0] * (n+1) for _ in range(m+1)] [OK]

Hint: Use list comprehension for 2D lists to avoid shared rows [OK]

Common Mistakes:

• Using multiplication for 2D lists causing shared references
• Mixing up m and n dimensions
• Creating 1D list instead of 2D

3. What is the output of the following Python code snippet that calculates the Levenshtein distance between 'kitten' and 'sitting'?

def levenshtein(s1, s2):
    m, n = len(s1), len(s2)
    dp = [[0] * (n+1) for _ in range(m+1)]
    for i in range(m+1):
        dp[i][0] = i
    for j in range(n+1):
        dp[0][j] = j
    for i in range(1, m+1):
        for j in range(1, n+1):
            if s1[i-1] == s2[j-1]:
                dp[i][j] = dp[i-1][j-1]
            else:
                dp[i][j] = 1 + min(dp[i-1][j], dp[i][j-1], dp[i-1][j-1])
    return dp[m][n]

print(levenshtein('kitten', 'sitting'))

medium

A. 4

B. 5

C. 3

D. 6

Solution

1. Step 1: Understand the Levenshtein distance calculation

   Compare 'kitten' and 'sitting' stepwise counting minimal edits: substitute 'k'->'s' (kitten -> sitten), substitute 'e'->'i' (sitten -> sittin), insert 'g' at end (sittin -> sitting). Total 3 edits.

2. Step 2: Verify with code logic

   The code correctly implements the DP approach and returns dp[m][n] which is 3 for these inputs.

3. Final Answer:

   3 -> Option C

4. Quick Check:

   Levenshtein('kitten','sitting') = 3 [OK]

Hint: Count minimal edits: replace, insert, delete [OK]

Common Mistakes:

• Counting only replacements, ignoring insertions
• Miscounting characters to change
• Confusing with substring length

4. Identify the bug in this Levenshtein distance code snippet:

def levenshtein_bug(s1, s2):
    m, n = len(s1), len(s2)
    dp = [[0] * (n+1)] * (m+1)
    for i in range(m+1):
        dp[i][0] = i
    for j in range(n+1):
        dp[0][j] = j
    for i in range(1, m+1):
        for j in range(1, n+1):
            if s1[i-1] == s2[j-1]:
                dp[i][j] = dp[i-1][j-1]
            else:
                dp[i][j] = 1 + min(dp[i-1][j], dp[i][j-1], dp[i-1][j-1])
    return dp[m][n]

medium

A. Using dp = [[0] * (n+1)] * (m+1) causes all rows to reference the same list

B. The loops should start from 0 instead of 1

C. The condition s1[i-1] == s2[j-1] should be s1[i] == s2[j]

D. The return statement should be dp[0][0]

Solution

1. Step 1: Analyze dp initialization

   Using multiplication to create dp causes all rows to point to the same list, so updating one row updates all rows.

2. Step 2: Understand impact on algorithm

   This shared reference breaks the DP table updates, causing incorrect results.

3. Final Answer:

   Using dp = [[0] * (n+1)] * (m+1) causes all rows to reference the same list -> Option A

4. Quick Check:

   Shared row references cause bugs [OK]

Hint: Avoid list multiplication for 2D lists; use list comprehension [OK]

Common Mistakes:

• Using wrong dp initialization
• Incorrect loop ranges
• Wrong indexing in condition

5. Given two strings s1 = 'intention' and s2 = 'execution', what is the minimum edit distance using Levenshtein algorithm? Consider insert, delete, and replace operations each cost 1.

hard

A. 7

B. 5

C. 4

D. 6

Solution

1. Step 1: Compare strings and count minimal edits

   Transform 'intention' to 'execution' requires the minimum number of single-character edits (insertions, deletions, substitutions) of 6.

2. Step 2: Confirm with Levenshtein DP logic

   Dynamic programming confirms minimum edits as 6 for these strings.

3. Final Answer:

   6 -> Option D

4. Quick Check:

   Levenshtein('intention','execution') = 6 [OK]

Hint: Count replacements and insertions carefully for longer strings [OK]

Common Mistakes:

• Underestimating number of replacements
• Ignoring insertions
• Confusing with Hamming distance