Trapping Rain Water Using Stack in DSA Java - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the main idea behind using a stack to solve the Trapping Rain Water problem?

Use a stack to keep track of bars that are bounded by higher bars on both sides. When a higher bar is found, calculate trapped water with the bars in the stack.

beginner

In the stack approach, what does each element in the stack represent?

Each element represents the index of a bar in the elevation map, used to find boundaries for trapped water.

intermediate

Why do we pop from the stack when the current bar height is greater than the height of the bar at the top of the stack?

Because we found a right boundary that can trap water with the popped bar as the bottom and the current bar as the right boundary.

intermediate

How do you calculate the trapped water volume when popping from the stack?

Calculate distance between current index and new top of stack minus one, then multiply by the height difference between the smaller boundary and the popped bar.

beginner

What is the time complexity of the Trapping Rain Water solution using a stack?

O(n), because each bar is pushed and popped at most once.

What data structure is used to solve the Trapping Rain Water problem efficiently?

A Hash Map

B Queue

C Linked List

D Stack

A stack helps track bars and boundaries to calculate trapped water efficiently.

When do you calculate trapped water in the stack approach?

A When current bar is lower than top of stack

B When current bar is higher than top of stack

C When stack is empty

D At the end of the array only

Trapped water is calculated when a higher bar is found, which forms a right boundary.

What does the distance represent in trapped water calculation?

A Height difference between bars

B Total bars in the array

C Number of bars between boundaries minus one

D Index of the current bar

Distance is the horizontal space between left and right boundaries minus one.

What happens to the stack when a bar of equal height is encountered?

A Push the new bar index

B Pop the top bar

C Ignore the new bar

D Clear the stack

We push the new bar index to keep track of boundaries.

What is the space complexity of the stack-based Trapping Rain Water solution?

A O(n)

B O(n^2)

C O(log n)

D O(1)

The stack can hold up to n indices in the worst case.

Explain step-by-step how the stack helps calculate trapped rain water in the elevation map.

Think about boundaries and how water is trapped between them.

Describe how to calculate the trapped water volume when a bar is popped from the stack.

Focus on the geometry of trapped water between bars.

Practice

1. What is the main purpose of using a stack in the Trapping Rain Water Using Stack algorithm?

easy

A. To keep track of the indices of bars that are not yet processed for water trapping

B. To store the heights of the bars in sorted order

C. To reverse the array of bar heights

D. To count the total number of bars

Solution

1. Step 1: Understand the role of the stack

   The stack stores indices of bars that are waiting to find a right boundary to trap water.

2. Step 2: Explain how the stack helps in trapping water

   When a bar taller than the top of the stack is found, it means water can be trapped between bars. The stack helps find the left boundary and calculate trapped water.

3. Final Answer:

   To keep track of the indices of bars that are not yet processed for water trapping -> Option A

4. Quick Check:

   Stack stores indices for trapping water = C [OK]

Hint: Stack holds indices to find boundaries for trapped water [OK]

Common Mistakes:

• Thinking stack stores heights instead of indices
• Assuming stack sorts bars by height
• Confusing stack use with reversing the array

2. Which of the following Java code snippets correctly initializes an empty stack to be used for trapping rain water indices?

easy

A. Stack stack = new Stack<int>();

B. Stack<Integer> stack = new Stack<>();

C. Stack<int> stack = new Stack<>();

D. Stack<Integer> stack = new Stack<int>();

Solution

1. Step 1: Check Java generic syntax for Stack

   Java uses generics with angle brackets and wrapper classes like Integer, not primitive int.

2. Step 2: Identify correct initialization

   Correct syntax is Stack<Integer> stack = new Stack<>(); which uses Integer wrapper and diamond operator.

3. Final Answer:

   Stack<Integer> stack = new Stack<>(); -> Option B

4. Quick Check:

   Use wrapper Integer and diamond operator = A [OK]

Hint: Use Stack<Integer> with diamond operator for empty stack [OK]

Common Mistakes:

• Using primitive int inside generics
• Omitting generic type causing raw type warning
• Incorrect constructor syntax with generics

3. What is the output of the following Java code snippet that calculates trapped rain water using stack?

int[] height = {0,1,0,2,1,0,1,3,2,1,2,1};
System.out.println(trap(height));

public static int trap(int[] height) {
    Stack<Integer> stack = new Stack<>();
    int water = 0, current = 0;
    while (current < height.length) {
        while (!stack.isEmpty() && height[current] > height[stack.peek()]) {
            int top = stack.pop();
            if (stack.isEmpty()) break;
            int distance = current - stack.peek() - 1;
            int boundedHeight = Math.min(height[current], height[stack.peek()]) - height[top];
            water += distance * boundedHeight;
        }
        stack.push(current++);
    }
    return water;
}

medium

A. 5

B. 7

C. 6

D. 8

Solution

1. Step 1: Trace the stack and water calculation

   The code uses a stack to find boundaries and calculates trapped water step-by-step for the given heights.

2. Step 2: Calculate trapped water for given input

   For the input array, the total trapped water calculated is 6 units after processing all bars.

3. Final Answer:

   6 -> Option C

4. Quick Check:

   Trapped water for given heights = 6 [OK]

Hint: Trace stack pops and water increments carefully [OK]

Common Mistakes:

• Miscounting distance between bars
• Incorrect bounded height calculation
• Forgetting to break when stack is empty

4. Identify the error in the following Java code snippet for trapping rain water using stack and select the fix.

public static int trap(int[] height) {
    Stack<Integer> stack = new Stack<>();
    int water = 0, current = 0;
    while (current <= height.length) {
        while (!stack.isEmpty() && height[current] > height[stack.peek()]) {
            int top = stack.pop();
            if (stack.isEmpty()) break;
            int distance = current - stack.peek() - 1;
            int boundedHeight = Math.min(height[current], height[stack.peek()]) - height[top];
            water += distance * boundedHeight;
        }
        stack.push(current++);
    }
    return water;
}

medium

A. Change 'stack.pop()' to 'stack.peek()' to avoid removing elements

B. Replace Stack<Integer> with ArrayList<Integer> for better performance

C. Remove the inner while loop to simplify the code

D. Change 'current <= height.length' to 'current < height.length' to avoid ArrayIndexOutOfBoundsException

Solution

1. Step 1: Identify the loop boundary error

   The condition 'current <= height.length' causes an attempt to access height[height.length], which is out of bounds.

2. Step 2: Fix the loop condition

   Changing it to 'current < height.length' prevents the out-of-bounds error and allows correct iteration.

3. Final Answer:

   Change 'current <= height.length' to 'current < height.length' to avoid ArrayIndexOutOfBoundsException -> Option D

4. Quick Check:

   Loop boundary must be less than array length = A [OK]

Hint: Use '<' for array index loops to avoid out-of-bounds [OK]

Common Mistakes:

• Using <= instead of < in loop condition
• Replacing stack with wrong data structure
• Removing necessary inner loop

5. Given the array height = {4, 2, 0, 3, 2, 5}, what is the total amount of trapped rain water calculated by the stack-based algorithm?

hard

A. 9

B. 7

C. 10

D. 8

Solution

1. Step 1: Analyze trapped water between bars

   Between bars of height 4 and 5, water is trapped over lower bars: 2, 0, 3, 2.

2. Step 2: Calculate trapped water volume

   Water level is min(4,5)=4. Water trapped = (4-2) + (4-0) + (4-3) + (4-2) = 2 + 4 + 1 + 2 = 9 units.

3. Final Answer:

   9 -> Option A

4. Quick Check:

   Sum trapped water between boundaries = 9 [OK]

Hint: Calculate water trapped between boundaries using min height [OK]

Common Mistakes:

• Using left boundary height only
• Ignoring right boundary taller bar
• Adding heights instead of differences