Dutch National Flag Three Way Partition in DSA Java - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the main goal of the Dutch National Flag problem?

To rearrange an array with three distinct values so that all elements of the first value come first, followed by all elements of the second value, and then all elements of the third value.

beginner

Which three pointers are used in the Dutch National Flag algorithm?

Low, mid, and high pointers are used to track the boundaries of the three partitions during the rearrangement.

beginner

In the Dutch National Flag algorithm, what happens when the mid pointer encounters the middle value?

The mid pointer simply moves forward because the middle value is already in the correct partition.

intermediate

Why does the Dutch National Flag algorithm swap elements when mid points to the lowest or highest value?

Swapping moves the lowest values to the front and the highest values to the end, helping to partition the array correctly in one pass.

intermediate

What is the time complexity of the Dutch National Flag algorithm?

It runs in O(n) time because it processes each element at most once in a single pass through the array.

What does the 'low' pointer represent in the Dutch National Flag algorithm?

A The boundary for the middle value partition

B The current element being checked

C The boundary for the highest value partition

D The boundary for the lowest value partition

The 'low' pointer marks the end of the lowest value partition.

When the mid pointer finds the highest value, what action is taken?

A Do nothing and move mid pointer forward

B Swap with element at high pointer and decrement high

C Move mid pointer forward

D Swap with element at low pointer and increment low

Swapping with the high pointer moves the highest value to the end, then high is decremented.

How many passes through the array does the Dutch National Flag algorithm require?

A One pass

B Two passes

C Three passes

D Depends on array size

The algorithm completes the partitioning in a single pass.

Which of these is NOT a correct step in the Dutch National Flag algorithm?

A Increment high when element is highest value

B Swap mid and low when element is lowest value

C Increment mid when element is middle value

D Swap mid and high when element is highest value

High pointer is decremented after swapping with highest value, not incremented.

What kind of values does the Dutch National Flag algorithm work with?

A Any number of distinct values

B Exactly two distinct values

C Exactly three distinct values

D Only sorted arrays

It is designed to partition arrays with exactly three distinct values.

Explain the step-by-step process of the Dutch National Flag algorithm using the low, mid, and high pointers.

Think about how each pointer moves and when swaps happen.

Describe why the Dutch National Flag algorithm is efficient compared to sorting the array normally.

Focus on how many times the array is scanned and memory usage.

Practice

1. What is the main goal of the Dutch National Flag Three Way Partition algorithm?

easy

A. To reverse the elements of an array

B. To rearrange an array into three parts based on a pivot value

C. To find the maximum element in an array

D. To sort an array in ascending order

Solution

1. Step 1: Understand the algorithm's purpose

   The Dutch National Flag algorithm divides an array into three parts: elements less than, equal to, and greater than a pivot.

2. Step 2: Compare with other options

   Sorting or finding max are different tasks; reversing is unrelated.

3. Final Answer:

   To rearrange an array into three parts based on a pivot value -> Option B

4. Quick Check:

   Partitioning by pivot = D [OK]

Hint: Remember: It partitions into three groups around a pivot [OK]

Common Mistakes:

• Confusing partitioning with sorting
• Thinking it finds max or min values
• Assuming it reverses the array

2. Which of the following is the correct Java syntax to swap two elements arr[i] and arr[j] in an integer array?

easy

A. int temp = arr[i]; arr[i] = arr[j]; arr[j] = temp;

B. arr[i] = arr[j]; arr[j] = arr[i];

C. swap(arr[i], arr[j]);

D. int temp = arr[i]; arr[i] = arr[j]; arr[j] = arr[i];

Solution

1. Step 1: Understand swapping logic

   Swapping requires a temporary variable to hold one value while assigning the other.

2. Step 2: Check each option

   swap(arr[i], arr[j]); assumes a non-existent swap function; arr[i] = arr[j]; arr[j] = arr[i]; overwrites arr[i] without saving; int temp = arr[i]; arr[i] = arr[j]; arr[j] = arr[i]; loses original arr[i] value by assigning arr[j] = arr[i] after changing arr[i]; int temp = arr[i]; arr[i] = arr[j]; arr[j] = temp; correctly uses temp.

3. Final Answer:

   int temp = arr[i]; arr[i] = arr[j]; arr[j] = temp; -> Option A

4. Quick Check:

   Use temp variable for swap = C [OK]

Hint: Use a temp variable to swap two array elements safely [OK]

Common Mistakes:

• Overwriting one element before saving it
• Using a non-existent swap function
• Swapping without a temporary variable

3. What will be the output array after applying the Dutch National Flag algorithm on arr = [2, 0, 2, 1, 1, 0] with pivot = 1?

medium

A. [0, 1, 2, 0, 1, 2]

B. [2, 2, 1, 1, 0, 0]

C. [1, 1, 0, 0, 2, 2]

D. [0, 0, 1, 1, 2, 2]

Solution

1. Step 1: Partition array by pivot 1

   Elements less than 1: 0,0; equal to 1: 1,1; greater than 1: 2,2.

2. Step 2: Arrange in order less, equal, greater

   So the array becomes [0, 0, 1, 1, 2, 2].

3. Final Answer:

   [0, 0, 1, 1, 2, 2] -> Option D

4. Quick Check:

   Partitioned array = A [OK]

Hint: Group elements less, equal, then greater than pivot [OK]

Common Mistakes:

• Not grouping equal elements in the middle
• Mixing order of groups
• Ignoring pivot value placement

4. Identify the error in this Java code snippet for Dutch National Flag partition:

int low = 0, mid = 0, high = arr.length - 1;
while (mid <= high) {
  if (arr[mid] < pivot) {
    swap(arr[low], arr[mid]);
    low++;
    mid++;
  } else if (arr[mid] == pivot) {
    mid++;
  } else {
    swap(arr[mid], arr[high]);
    high--;
  }
}

medium

A. The pivot comparison should use > instead of <

B. The loop condition should be mid < high

C. swap function is called incorrectly with array elements instead of indices

D. The variables low, mid, high are not initialized properly

Solution

1. Step 1: Check swap function usage

   swap(arr[low], arr[mid]) passes values, not indices; swap needs indices to swap elements in array.

2. Step 2: Verify other parts

   Loop condition and variable initialization are correct; pivot comparisons are standard.

3. Final Answer:

   swap function is called incorrectly with array elements instead of indices -> Option C

4. Quick Check:

   Swap needs indices, not values = A [OK]

Hint: Swap array elements by indices, not by passing values [OK]

Common Mistakes:

• Passing values instead of indices to swap
• Wrong loop boundary condition
• Incorrect pivot comparison operators

5. Given an array arr = [3, 5, 2, 1, 4, 3, 2] and pivot = 3, how many swaps will the Dutch National Flag algorithm perform to partition the array?

hard

A. 5

B. 4

C. 3

D. 6

Solution

1. Step 1: Trace swaps during partition

   Initial: low=0, mid=0, high=6 - mid=0 (3 == pivot): mid++ (0 swaps) - mid=1 (5 > pivot): swap arr[mid] and arr[high] -> swap arr[1] and arr[6] (swap 1), high--=5 - mid=1 (now 2 < pivot): swap arr[low] and arr[mid] -> swap arr[0] and arr[1] (swap 2), low++=1, mid++=2 - mid=2 (2 < pivot): swap arr[low] and arr[mid] -> swap arr[1] and arr[2] (swap 3), low++=2, mid++=3 - mid=3 (1 < pivot): swap arr[low] and arr[mid] -> swap arr[2] and arr[3] (swap 4), low++=3, mid++=4 - mid=4 (4 > pivot): swap arr[mid] and arr[high] -> swap arr[4] and arr[5] (swap 5), high--=4 - mid=4 (now 3 == pivot): mid++=5 Loop ends as mid > high.

2. Step 2: Count total swaps

   Total swaps counted = 5.

3. Final Answer:

   5 -> Option A

4. Quick Check:

   Count swaps carefully during partition = B [OK]

Hint: Count swaps when elements move across low, mid, high pointers [OK]

Common Mistakes:

• Counting swaps incorrectly when pivot equals element
• Ignoring swaps after high pointer moves
• Assuming one swap per iteration