Topological Sort Using DFS in DSA Go - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the main idea behind Topological Sort using DFS?

We visit each node and explore all its neighbors first. After visiting all neighbors, we add the node to the result. This way, nodes appear after all nodes they depend on.

beginner

In Topological Sort using DFS, when do we add a node to the sorted list?

We add the node after visiting all its neighbors (i.e., when the DFS call for that node finishes). This ensures dependencies come first.

intermediate

Why can't Topological Sort be applied to graphs with cycles?

Because cycles mean some nodes depend on each other in a loop, making it impossible to order them linearly without breaking dependencies.

beginner

What data structure is commonly used to store the result of Topological Sort using DFS?

A stack or a list where nodes are added after visiting all neighbors. The final order is the reverse of the order nodes were added.

intermediate

How does DFS help in detecting cycles during Topological Sort?

By tracking nodes currently in the recursion stack (visiting), if we visit a node already in this stack, it means a cycle exists.

What is the first step in Topological Sort using DFS?

A Reverse the graph edges

B Add all nodes to the result list

C Check if the graph is empty

D Visit an unvisited node and start DFS

We start DFS from an unvisited node to explore its dependencies.

When do we add a node to the topological order in DFS?

A After visiting all neighbors

B Before visiting neighbors

C When the node is first discovered

D When a cycle is detected

We add the node after all its neighbors are visited to ensure dependencies come first.

What does a cycle in the graph mean for Topological Sort?

A Sort is still possible

B Sort is impossible

C Sort order is reversed

D Sort is faster

Cycles prevent a linear ordering of nodes respecting dependencies.

Which data structure helps reverse the order of nodes after DFS?

A Stack

B Linked list

C Queue

D Hash map

A stack stores nodes in reverse finishing order, which we reverse to get topological order.

How can DFS detect cycles during Topological Sort?

A By counting edges

B By checking if a node is visited twice

C By checking if a node is in the current recursion stack

D By sorting nodes alphabetically

If a node is found in the current recursion stack, it means a cycle exists.

Explain step-by-step how Topological Sort using DFS works on a directed graph.

Think about visiting nodes and when to add them to the order.

Describe how cycle detection is integrated into Topological Sort using DFS.

Focus on how recursion stack helps find cycles.

Practice

1. What is the main purpose of using DFS in Topological Sort on a directed graph?

easy

A. To visit nodes in a way that ensures dependencies come before dependents

B. To find the shortest path between two nodes

C. To detect cycles in an undirected graph

D. To count the number of connected components

Solution

1. Step 1: Understand DFS role in Topological Sort

   DFS visits nodes deeply, ensuring all dependencies of a node are visited before the node itself.

2. Step 2: Relate DFS order to dependencies

   By pushing nodes to a stack after visiting all neighbors, we get an order where dependencies come before dependents.

3. Final Answer:

   To visit nodes in a way that ensures dependencies come before dependents -> Option A

4. Quick Check:

   DFS ensures dependency order = A [OK]

Hint: DFS post-order gives correct dependency order [OK]

Common Mistakes:

• Confusing DFS with BFS for topological sort
• Thinking topological sort finds shortest paths
• Assuming DFS detects cycles in undirected graphs here

2. Which of the following Go code snippets correctly declares a recursive DFS function for topological sort?

easy

A. func dfs(node int, graph map[int][]int, visited map[int]bool, stack *[]int) { if visited[node] { return } visited[node] = true *stack = append(*stack, node) for _, neighbor := range graph[node] { dfs(neighbor, graph, visited, stack) } }

B. func dfs(node int, graph map[int][]int, visited map[int]bool, stack []int) { if visited[node] { return } visited[node] = true for _, neighbor := range graph[node] { dfs(neighbor, graph, visited, stack) } stack = append(stack, node) }

C. func dfs(node int, graph map[int][]int, visited map[int]bool, stack *[]int) { if visited[node] { return } for _, neighbor := range graph[node] { dfs(neighbor, graph, visited, stack) } visited[node] = true *stack = append(*stack, node) }

D. func dfs(node int, graph map[int][]int, visited map[int]bool, stack *[]int) { if !visited[node] { visited[node] = true for _, neighbor := range graph[node] { dfs(neighbor, graph, visited, stack) } *stack = append(*stack, node) } }

Solution

1. Step 1: Check visited condition and marking

   func dfs(node int, graph map[int][]int, visited map[int]bool, stack *[]int) { if !visited[node] { visited[node] = true for _, neighbor := range graph[node] { dfs(neighbor, graph, visited, stack) } *stack = append(*stack, node) } } correctly checks if node is not visited before processing and marks it visited inside the condition.

2. Step 2: Confirm stack append and recursion

   It recursively calls dfs on neighbors and appends node to stack after visiting neighbors, using pointer to modify stack.

3. Final Answer:

   Option D code snippet -> Option D

4. Quick Check:

   Correct DFS recursion and stack append = D [OK]

Hint: Use pointer for stack to append in recursive DFS [OK]

Common Mistakes:

• Passing stack by value causing no changes
• Marking visited after recursion causing repeated visits
• Appending node before visiting neighbors

3. What is the output order of nodes after performing topological sort using DFS on this graph?

graph := map[int][]int{
  5: {2, 0},
  4: {0, 1},
  2: {3},
  3: {1},
  0: {},
  1: {},
}

Assuming DFS visits nodes in ascending order starting from 5, then 4.

medium

A. [5, 4, 2, 3, 1, 0]

B. [4, 5, 2, 3, 1, 0]

C. [4, 5, 0, 1, 2, 3]

D. [5, 4, 3, 2, 1, 0]

Solution

1. Step 1: Perform DFS starting from node 5

   DFS from 5 (neighbors ascending: 0 then 2): DFS(0) append 0; then DFS(2) -> DFS(3) -> DFS(1) append 1; append 3; append 2; append 5. Then DFS from 4 (0,1 visited), append 4.

2. Step 2: Collect nodes in post-order (append after visiting neighbors)

   Post-order stack push order: 0, 1, 3, 2, 5, 4. Reversing gives [4, 5, 2, 3, 1, 0].

3. Step 3: Consider DFS starting order and visited nodes

   Since DFS visits 5 first, then 4, the final topological order is the reverse of the post-order stack: [4, 5, 2, 3, 1, 0]. However, the question states DFS visits nodes in ascending order starting from 5, then 4. The actual post-order stack is [0,1,3,2,5,4], so reversed order is [4,5,2,3,1,0].

4. Final Answer:

   [4, 5, 2, 3, 1, 0] -> Option B

5. Quick Check:

   Post-order reverse = [4,5,2,3,1,0] [OK]

Hint: Reverse DFS post-order for topological sort output [OK]

Common Mistakes:

• Not reversing the stack after DFS
• Visiting nodes in wrong order
• Ignoring already visited nodes

4. Identify the bug in this DFS-based topological sort code snippet:

func dfs(node int, graph map[int][]int, visited map[int]bool, stack *[]int) {
  if visited[node] {
    return
  }
  for _, neighbor := range graph[node] {
    dfs(neighbor, graph, visited, stack)
  }
  visited[node] = true
  *stack = append(*stack, node)
}

medium

A. Visited is marked after recursion, causing repeated visits

B. Stack is appended before visiting neighbors

C. Visited map is not initialized

D. Function does not return any value

Solution

1. Step 1: Check visited marking timing

   Visited is marked after recursive calls, so neighbors may revisit the same node multiple times.

2. Step 2: Correct visited marking position

   Visited should be marked before recursion to avoid repeated visits and infinite loops.

3. Final Answer:

   Visited is marked after recursion, causing repeated visits -> Option A

4. Quick Check:

   Mark visited before recursion = B [OK]

Hint: Mark visited before recursion to avoid repeats [OK]

Common Mistakes:

• Marking visited too late causing infinite recursion
• Appending stack before recursion
• Ignoring initialization of visited map

5. Given a directed graph with edges:

1 -> 2, 1 -> 3, 3 -> 4, 2 -> 4, 4 -> 5

If you want to find a valid order to complete tasks represented by nodes, which topological sort order is correct?

hard

A. [3, 1, 2, 4, 5]

B. [5, 4, 3, 2, 1]

C. [1, 2, 3, 4, 5]

D. [2, 1, 3, 4, 5]

Solution

1. Step 1: Analyze dependencies from edges

   Node 1 must come before 2 and 3; 2 and 3 before 4; 4 before 5.

2. Step 2: Find order respecting dependencies

   Order [1, 2, 3, 4, 5] respects all edges: 1 before 2 and 3, 2 and 3 before 4, 4 before 5.

3. Final Answer:

   [1, 2, 3, 4, 5] -> Option C

4. Quick Check:

   Dependencies respected = C [OK]

Hint: Start with nodes having no incoming edges [OK]

Common Mistakes:

• Reversing order ignoring dependencies
• Placing dependent before dependency
• Choosing order with cycles