S3 lifecycle rules in AWS - Cheat Sheet & Quick Revision

Recall & Review

beginner

What is the purpose of S3 lifecycle rules?

S3 lifecycle rules help automatically manage objects in a bucket by moving them between storage classes or deleting them after a set time to save cost and keep data organized.

beginner

Name two common actions you can set in an S3 lifecycle rule.

You can set actions to transition objects to cheaper storage classes like Glacier or to expire (delete) objects after a certain number of days.

intermediate

How do lifecycle rules help reduce storage costs?

By moving older or less-used objects to cheaper storage classes or deleting them, lifecycle rules reduce the amount of expensive storage used, lowering costs.

intermediate

Can lifecycle rules be applied to specific objects in a bucket?

Yes, lifecycle rules can target objects using prefixes or tags to apply rules only to certain groups of objects.

advanced

What happens if multiple lifecycle rules apply to the same object?

Amazon S3 applies the most restrictive action from the matching rules to the object to avoid conflicts.

What is the main benefit of using S3 lifecycle rules?

A Automatically manage object storage and reduce costs

B Increase the size of S3 buckets

C Encrypt objects in the bucket

D Backup data to another region

Lifecycle rules automate moving or deleting objects to manage storage and reduce costs.

Which storage class is commonly used for archiving objects with lifecycle rules?

A S3 Standard

B S3 One Zone-IA

C S3 Glacier

D S3 Intelligent-Tiering

S3 Glacier is designed for long-term archiving and is often used in lifecycle transitions.

How can you target specific objects with lifecycle rules?

A By bucket name only

B Using object prefixes or tags

C By object size

D By object owner

Lifecycle rules can filter objects by prefixes or tags to apply actions selectively.

What does the 'expiration' action in a lifecycle rule do?

A Deletes objects after a set time

B Moves objects to Glacier

C Encrypts objects

D Copies objects to another bucket

Expiration deletes objects automatically after the specified time.

If two lifecycle rules conflict, how does S3 decide which to apply?

A Applies both actions

B Applies the least restrictive action

C Ignores both rules

D Applies the most restrictive action

S3 applies the most restrictive action to avoid conflicts.

Explain how S3 lifecycle rules help manage data storage and costs.

Think about moving old files to cheaper storage or deleting them.

Describe how you can apply lifecycle rules to only certain objects in an S3 bucket.

Consider how to pick specific files by name or label.

Practice

1. What is the main purpose of an S3 lifecycle rule?

easy

A. To automatically move or delete files based on time to save costs

B. To manually upload files to S3 buckets

C. To create backups of files in S3

D. To encrypt files stored in S3

Solution

1. Step 1: Understand lifecycle rule purpose

   S3 lifecycle rules automate management of files by moving or deleting them after a set time.

2. Step 2: Compare options with lifecycle rule function

   Only To automatically move or delete files based on time to save costs describes automatic moving or deleting files to save costs, which matches lifecycle rules.

3. Final Answer:

   To automatically move or delete files based on time to save costs -> Option A

4. Quick Check:

   Lifecycle rules automate file management = C [OK]

Hint: Lifecycle rules automate file moves or deletes by time [OK]

Common Mistakes:

• Confusing lifecycle rules with manual upload
• Thinking lifecycle rules create backups
• Assuming lifecycle rules encrypt files

2. Which of the following is the correct JSON snippet to define a lifecycle rule that deletes objects after 30 days?

easy

A. {"Rules": [{"Status": "Disabled", "Expiration": {"Days": 30}}]}

B. {"Rules": [{"Status": "Enabled", "Transition": {"Days": 30}}]}

C. {"Rules": [{"Status": "Enabled", "Expiration": {"Days": 30}}]}

D. {"Rules": [{"Status": "Enabled", "Expiration": {"Date": 30}}]}

Solution

1. Step 1: Identify correct lifecycle rule syntax for expiration

   The expiration action uses "Expiration" with "Days" key and rule must be "Enabled".

2. Step 2: Check each option for correct keys and values

   {"Rules": [{"Status": "Enabled", "Expiration": {"Days": 30}}]} uses "Expiration" with "Days":30 and "Status":"Enabled" which is correct. {"Rules": [{"Status": "Enabled", "Transition": {"Days": 30}}]} uses "Transition" which is for storage class change, not deletion. {"Rules": [{"Status": "Disabled", "Expiration": {"Days": 30}}]} disables the rule. {"Rules": [{"Status": "Enabled", "Expiration": {"Date": 30}}]} uses "Date" instead of "Days" which is invalid.

3. Final Answer:

   {"Rules": [{"Status": "Enabled", "Expiration": {"Days": 30}}]} -> Option C

4. Quick Check:

   Expiration with Days and Enabled status = A [OK]

Hint: Expiration uses "Days" and rule must be enabled [OK]

Common Mistakes:

• Using Transition instead of Expiration for deletion
• Setting rule status to Disabled
• Using Date instead of Days for expiration

3. Given this lifecycle rule snippet, what happens to objects after 60 days?

{
  "Rules": [{
    "Status": "Enabled",
    "Prefix": "logs/",
    "Transition": {"Days": 60, "StorageClass": "GLACIER"}
  }]
}

medium

A. Objects in the 'logs/' folder are moved to Glacier storage after 60 days

B. Objects in the 'logs/' folder are deleted after 60 days

C. All objects in the bucket are moved to Glacier after 60 days

D. Objects in the 'logs/' folder are archived immediately

Solution

1. Step 1: Understand the Transition action with Prefix

   The rule targets objects with prefix "logs/" and transitions them to Glacier after 60 days.

2. Step 2: Analyze options against rule behavior

   Objects in the 'logs/' folder are moved to Glacier storage after 60 days correctly states objects in 'logs/' move to Glacier after 60 days. Objects in the 'logs/' folder are deleted after 60 days incorrectly says deletion. All objects in the bucket are moved to Glacier after 60 days incorrectly applies to all objects, not just prefix. Objects in the 'logs/' folder are archived immediately says immediate archive which is wrong.

3. Final Answer:

   Objects in the 'logs/' folder are moved to Glacier storage after 60 days -> Option A

4. Quick Check:

   Transition with prefix moves files after days = A [OK]

Hint: Transition moves files after days, prefix limits target [OK]

Common Mistakes:

• Confusing Transition with Expiration (deletion)
• Ignoring the prefix filter
• Assuming all bucket objects are affected

4. You wrote this lifecycle rule but it does not delete files after 90 days:

{
  "Rules": [{
    "Status": "Enabled",
    "Expiration": {"Days": 90}
  }]
}

What is the likely problem?

medium

A. Missing a required rule ID

B. Status should be set to Disabled to activate

C. Expiration action cannot be used without Transition

D. Rule is missing a filter or prefix to target objects

Solution

1. Step 1: Recall S3 lifecycle rule required fields

   Every lifecycle rule requires a unique "ID" field only if using AWS CLI or SDKs; however, in JSON configuration for S3 console, "ID" is optional. Filter or prefix is required to target objects; otherwise, the rule applies to all objects.

2. Step 2: Analyze given rule

   The rule lacks a filter or prefix, so it applies to all objects. If files are not deleting, likely the rule is not targeting the intended objects. Missing "ID" is not always mandatory (A wrong). Status "Enabled" is correct (B wrong). Expiration works standalone (C wrong). Filter or prefix is needed to target specific objects (D correct).

3. Final Answer:

   Rule is missing a filter or prefix to target objects -> Option D

4. Quick Check:

   Missing filter or prefix means rule may not target intended objects = D [OK]

Hint: Filter or prefix is needed to target objects for deletion [OK]

Common Mistakes:

• Believing filter or prefix is optional (A)
• Thinking Expiration requires Transition (C)
• Status should be Disabled to activate (B)

5. You want to save costs by moving files older than 30 days to STANDARD_IA storage and delete files older than 365 days, but only for files in the archive/ folder. Which lifecycle rule setup achieves this?

hard

A. {
"Rules": [{
"Status": "Enabled",
"Prefix": "archive/",
"Transition": {"Days": 365, "StorageClass": "STANDARD_IA"},
"Expiration": {"Days": 30}
}]
}

B. {
"Rules": [{
"Status": "Enabled",
"Filter": {"Prefix": "archive/"},
"Transitions": [{"Days": 30, "StorageClass": "STANDARD_IA"}],
"Expiration": {"Days": 365}
}]
}

C. {
"Rules": [{
"Status": "Enabled",
"Filter": {"Prefix": "archive/"},
"Transition": {"Days": 365, "StorageClass": "STANDARD_IA"},
"Expiration": {"Days": 30}
}]
}

D. {
"Rules": [{
"Status": "Enabled",
"Filter": {"Prefix": "archive/"},
"Transitions": [{"Days": 365, "StorageClass": "STANDARD_IA"}],
"Expiration": {"Days": 30}
}]
}

Solution

1. Step 1: Identify correct keys for multiple transitions and expiration

   Multiple transitions require "Transitions" array. Expiration is separate. Filter with Prefix targets 'archive/'.

2. Step 2: Check each option for correct days and storage class order

   { "Rules": [{ "Status": "Enabled", "Prefix": "archive/", "Transition": {"Days": 365, "StorageClass": "STANDARD_IA"}, "Expiration": {"Days": 30} }] } reverses days and expiration. { "Rules": [{ "Status": "Enabled", "Filter": {"Prefix": "archive/"}, "Transitions": [{"Days": 30, "StorageClass": "STANDARD_IA"}], "Expiration": {"Days": 365} }] } correctly uses "Transitions" array with 30 days to STANDARD_IA and expiration at 365 days, with filter prefix. { "Rules": [{ "Status": "Enabled", "Filter": {"Prefix": "archive/"}, "Transition": {"Days": 365, "StorageClass": "STANDARD_IA"}, "Expiration": {"Days": 30} }] } uses singular "Transition" but reverses days (365 to IA, expire 30). { "Rules": [{ "Status": "Enabled", "Filter": {"Prefix": "archive/"}, "Transitions": [{"Days": 365, "StorageClass": "STANDARD_IA"}], "Expiration": {"Days": 30} }] } reverses days and expiration.

3. Step 3: Choose best practice with multiple transitions

   { "Rules": [{ "Status": "Enabled", "Filter": {"Prefix": "archive/"}, "Transitions": [{"Days": 30, "StorageClass": "STANDARD_IA"}], "Expiration": {"Days": 365} }] } uses "Transitions" array which is best practice for multiple transitions, even if only one here, and matches requirements.

4. Final Answer:

   Rule with Filter prefix 'archive/', Transitions at 30 days to STANDARD_IA, Expiration at 365 days -> Option B

5. Quick Check:

   Multiple transitions use "Transitions" array, filter prefix set = B [OK]

Hint: Use "Transitions" array for multiple moves, filter prefix to target folder [OK]

Common Mistakes:

• Confusing Transition singular vs Transitions array
• Mixing up days for transition and expiration
• Not using filter or prefix to limit scope