Bird
0
0

Identify the error in this G-code command: G1 X50 Y Z0.3 F1500

medium📝 Analysis Q6 of 15
3D Printing - G-code Fundamentals
Identify the error in this G-code command: G1 X50 Y Z0.3 F1500
AMissing Y coordinate value
BIncorrect command letter
CFeed rate (F) value is too high
DZ coordinate should be before Y
Step-by-Step Solution
Solution:

  1. Step 1: Analyze the command parameters

    The command has X=50, Y without a value, Z=0.3, and F=1500.

  2. Step 2: Identify the missing value

    The Y parameter is incomplete because it lacks a number after it.

  3. Final Answer:

    Missing Y coordinate value -> Option A

  4. Quick Check:

    Missing coordinate value = B [OK]
Quick Trick: Every coordinate must have a value [OK]
Common Mistakes:
  • Ignoring missing values
  • Thinking order matters for coordinates
  • Assuming feed rate is error

Want More Practice?

15+ quiz questions · All difficulty levels · Free

Free Signup - Practice All Questions
More 3D Printing Quizzes
Advanced Print Settings - Print speed and acceleration - Quiz 9hard Advanced Print Settings - Ironing for smooth top surfaces - Quiz 6medium Advanced Print Settings - Temperature settings (nozzle and bed) - Quiz 14medium Advanced Print Settings - Retraction settings for stringing prevention - Quiz 2easy G-code Fundamentals - Reading G-code for troubleshooting - Quiz 11easy G-code Fundamentals - Manual G-code modifications - Quiz 15hard Multi-Material and Color Printing - Why multi-material expands possibilities - Quiz 11easy Slicer Software Basics - Popular slicers (Cura, PrusaSlicer, OrcaSlicer) - Quiz 4medium Support Structures - Designing for minimal supports - Quiz 12easy Support Structures - Designing for minimal supports - Quiz 4medium