Bird
0
0

Which of the following is the correct step to orient a model before printing?

easy📝 Factual Q12 of 15
3D Printing - Slicer Software Basics
Which of the following is the correct step to orient a model before printing?
AIncrease the print speed without moving the model
BChange the model's color to blue
CRotate and move the model to fit the print bed
DDelete the model from the software
Step-by-Step Solution
Solution:

  1. Step 1: Define orienting in 3D printing

    Orienting means adjusting the model's position and rotation so it fits well on the print bed.

  2. Step 2: Evaluate the options

    Changing color, deleting, or changing print speed do not relate to positioning the model.

  3. Final Answer:

    Rotate and move the model to fit the print bed -> Option C

  4. Quick Check:

    Orienting = rotate and move model [OK]
Quick Trick: Orient means rotate and move model on print bed [OK]
Common Mistakes:
  • Confusing orientation with color changes
  • Skipping the step of moving the model
  • Thinking orientation means deleting the model

Want More Practice?

15+ quiz questions · All difficulty levels · Free

Free Signup - Practice All Questions
More 3D Printing Quizzes
Advanced Print Settings - First layer settings for adhesion - Quiz 6medium G-code Fundamentals - Manual G-code modifications - Quiz 13medium G-code Fundamentals - What is G-code - Quiz 10hard Multi-Material and Color Printing - Filament swap for color changes - Quiz 11easy Multi-Material and Color Printing - Why multi-material expands possibilities - Quiz 14medium Slicer Software Basics - Infill patterns and density - Quiz 9hard Support Structures - Why supports are needed for overhangs - Quiz 15hard Support Structures - When supports are needed - Quiz 5medium Support Structures - Designing for minimal supports - Quiz 11easy Support Structures - Removing supports cleanly - Quiz 15hard