A user wants to improve first layer adhesion on a glass bed without using glue or tape. Which combination of settings is best?

hard📝 Application Q8 of 15

3D Printing - Advanced Print Settings

AUse default settings without changes

BDecrease bed temperature to 20°C and increase first layer speed to 50 mm/s

CTurn off bed heating and increase first layer height to 0.5 mm

DIncrease bed temperature to 60°C and lower first layer speed to 15 mm/s

Step-by-Step Solution

Solution:

Step 1: Understand glass bed adhesion needs
Glass beds stick better when heated moderately and printing is slow for first layer.
Step 2: Choose settings that improve adhesion
Increasing bed temperature to 60°C warms the surface, and slowing speed to 15 mm/s helps filament bond.
Final Answer:
Increase bed temperature to 60°C and lower first layer speed to 15 mm/s -> Option D
Quick Check:
Warm bed + slow speed = better glass bed adhesion [OK]

Quick Trick: Warm bed and slow speed improve glass bed adhesion [OK]

Common Mistakes:

Master "Advanced Print Settings" in 3D Printing

9 interactive learning modes - each teaches the same concept differently

Want More Practice?

15+ quiz questions · All difficulty levels · Free

More 3D Printing Quizzes